Surface Slim 2 Pen not writing on Surface PRO

-

 It is an nightmare to solve this issue, put with a lot of patience you can solve it.
Uninstall and reinstall everything on driver and firmware related to PEN and TOUCH .

Procedue:

1. Surface Pen is paired on your Surface Pro open Device Manager

2. Click View on top and check Show hidden devices.

3. Expand Human Interface Devices category. Right click drivers and select Uninstall. 

HID-compliant pen > Uninstall device
Surface pen settings > Uninstall device
Surface pen integration > Uninstall device
HID-Compliant touch screen > Uninstall device
Intel (R) Precise Touch Device > Uninstall device
Surface Touch Pen Processor > Uninstall device

Some have different names, but AGIAN uninstall EVERYTHING with PEN and TOUCH !

Note:
If prompted with a checkbox stating, "Delete the driver software for this device", leave it uncheck then hit Uninstall.

4. Expand Firmware > Surface touch > Uninstall device

Note:
If prompted with a checkbox stating, "Delete the driver software for this device", leave it uncheck then hit Uninstall.

5. Restart

7. Run Windows Update and wait (it will take 15-60min!!)

8. Restart again

(Check is Update was all successful, it could be happen that some drivers/ firmware is uncomplete
In this case, run Windows Update again !)

9. Restart


Now it should finally work, the Surface Pen.



Comments

Post a Comment

Popular posts from this blog

How to hide users from GAL if they are AD Connect synchronized

-
Image
How to hide and un-hide users from Global Address List (GAL) in Exchange Online if they are AD Connect synchronized Hiding User from GAL isn't possible if those are synchronized form On-Premises Active Directory. The local AD is the leading system for all important attributes, like SMTP, UPN and hiding from GAL. Especially during a cross-tenant migration, you do not want to see not migrated user in the GAL. Those User aren't actively working until their cut-over day. Since the Exchange Online attribute  msExchHideFromAddressList s is an AD on-premises parameter, we have two possible ways hiding user in BME from GAL.   Modify the AD Connect for your teant with a custom rule, by using a extensionAttribute to set the HidefromGAL. In this rule, for users which have an entry in the extensionAttribute, hiding / un-hiding will be controlled by AD Connect This is the best option for Cross-Tenant Migration, if you run 2 or more AD Connect system We direct modif...
Read more

Cannot join external Lync Meeting: Lync Edge Server Single IP Address (Lync Edge Server Single IP Web Conferenceing Problem)

-
Image
Lync Edge Server FQDN and IP PORTS (Version 1.2, Update 26.11.2014) As we all know, we can configure Lync Edge Server in several way. 1) Single Edge Server with a SINGLE IP ADDRESS 2) Single Edge Server with MULTIPLE IP ADDRESSES (3x IPs) 3) Multiple Edge Server in a Pool, with MULTIPLE IP ADDRESSES (Zx 3 IPs) Regardless what we are going to configure, there are common / well-known TCP Port necessary making Lync work, which are: Access: Port: 443 and 5061 Conferencing: Port: 443 and (444) AV: Port: 443 (I have not listed other ports, e.g. STUN or the dynamic port range. This is not required for the topic discussed here) External FQDN with single IP address: What can we see here? If we are going to choose a single IP address, we would have TCP Port overlapping. Therefore the only way avoiding this is assigning other ports. Additionally we will also see and are reminded that Lync highly depends on DNS. If we have single IP, we must have use single, uniqu...
Read more

MFA with Guest Access and different tenants settings

-
Image
There is an update regarding MFA Multi Factor Authentication. If you are guest with a different Tenant, the MFA Settings are now reflecting the settings of all tenants in a different way. Each MFA setting is reflected and you can setup your MFA device as per tenant and the admin settings allow. Login to your Profile in Office 365/ Azure AD: https://account.activedirectory.windowsazure.com/r/#/profile or https://myapps.microsoft.com Go to your PROFILE: Sign in to https://myapps.microsoft.com Select your account name in the top right, then select profile. Select Additional security verification. If might be happen, your admin hast configured MFA, so you wouldn't see this menu. Simply switch the tenant to the guest tenant where you need to configure MFA. Once you go back to your profile and you will find the MFA device and other settings a usual:
Read more